Shandong Jingrui Bearing Co., Ltd

f the radial runout of the spindle is measured after the bearing has been installed in the mainframe, a certain variation in the measured value of each revolution can be found; when the measurement is carried out continuously, it can be found that after a certain number of revolutions...

In addition to the excellent quality of bearings, they are also very fine parts, both high-functioning bearings, and if they are not used properly in the process, they will not only fail to achieve the expected function, but also easily damage the bearings...

As the bearings are rust-proofed and packaged, they should not be opened until they are ready for installation. In addition, the anti-rust oil applied to the bearings has good lubricating properties and can be used directly without cleaning for general...

Grease lubrication has a sealed method of pre-filling the sealed bearings with grease, as well as filling the housing with the appropriate amount of grease and replenishing or replacing the grease supply at regular intervals. In addition, there are many high temperature bearings...